marktbh 0 Posted May 7, 2013 I just got Arma 2 for DayZ, and I've been having problems with my HD 7870. My CPU is FX 8320 OC'd to 4.3ghz, 2x2 1600mhz RAM (4gb's of ram is not the problem, I checked in the resource monitor and it only went up to 2.9 gb). Every single other game I have runs fine, just Dayz... I set the quality to lowest and I get 10-15, then highest and still 10-15 fps.. I have latest drivers also. I changed the config file in the Arma 2 according to other people having lag problems, and still no help.What can I do? Share this post Link to post Share on other sites
aarnoman 13 Posted May 7, 2013 (edited) Under normal circumstances, I would assume that your CPU is bottlenecking, but there is no way that that is the case here in therms of the CPU specification. I'm getting an HD 7870 in a couple of ways, I shall test it on my machine and let you know if I get the same problems. This would at least help pinpoint the reasons.Sorry I can't be of more help at the moment. Edited May 7, 2013 by Aarnoman Share this post Link to post Share on other sites
diddums 3760 Posted May 7, 2013 Are you running windows 32 bit? Share this post Link to post Share on other sites
marktbh 0 Posted May 7, 2013 Windows 64 bit ^ .And no, CPU is not bottlenecking in anyway. I just tried Arma 2 and operation arrowhead campaign mode and I changed the settings to highest possible without vsync I'm getting 70 fps. So it's most likely something with my Dayz. I'll keep trying stuff I guess, lol. Share this post Link to post Share on other sites
dulix11 731 Posted May 7, 2013 It might be something wrong with the server? Share this post Link to post Share on other sites
aarnoman 13 Posted May 7, 2013 Windows 64 bit ^ .And no, CPU is not bottlenecking in anyway. I just tried Arma 2 and operation arrowhead campaign mode and I changed the settings to highest possible without vsync I'm getting 70 fps. So it's most likely something with my Dayz. I'll keep trying stuff I guess, lol.I see. In case you figure out where your problem lies, could you post it in this thread afterwards? If not, I'll try to figure this out when I get my 7870, and post the results. Share this post Link to post Share on other sites
marktbh 0 Posted May 7, 2013 ATM I'm redownloading drivers.. Hopefully it works Share this post Link to post Share on other sites
colekern 1364 Posted May 7, 2013 Try Arma 2 single player and give me your FPS on that.Also, crank some settings up. Turning everything on low puts a lot on your CPU. Share this post Link to post Share on other sites
aarnoman 13 Posted May 7, 2013 Try Arma 2 single player and give me your FPS on that.Also, crank some settings up. Turning everything on low puts a lot on your CPU."And no, CPU is not bottlenecking in anyway. I just tried Arma 2 and operation arrowhead campaign mode and I changed the settings to highest possible without vsync I'm getting 70 fps" Share this post Link to post Share on other sites
Atom Quark 437 Posted May 7, 2013 (edited) Very strange indeed. I run dayz with a 965BE at 3.7ghz and a 7850 1ghz 2gig and get the usual 50-60 forest and 35 in cherno. All settings very high, antialias Norm, Post Disabled, and HDR normal. Have you tried different servers and got the same result? Edited May 7, 2013 by AtomQuark 1 Share this post Link to post Share on other sites
clutchy08 5 Posted May 7, 2013 1.)Go To Start then Hover over Computer Right click on it then down the Bottom go to Manage Computer Managment will Pop up on the Left Side Look for Device Manager Click on it Now look to the Right and You will see an Arrow Pointing Right > Expand them and let me no do you see any thing with a Yellow Symbol2.)Go To Start Type in to Search Power Look for Power Options Click it and you will see Balanced & Power Saver Make Sure it is on Balanced, I Have seen some people make this Mistake and it will make Games Unplayable, Please Reply and tell me and i will try Assist you Share this post Link to post Share on other sites
clutchy08 5 Posted May 7, 2013 You should not be having any problems with this Build, i have Built Many of your Spec and Run Battlefield 3 on Ultra with out any Problems, Share this post Link to post Share on other sites
colekern 1364 Posted May 7, 2013 "And no, CPU is not bottlenecking in anyway. I just tried Arma 2 and operation arrowhead campaign mode and I changed the settings to highest possible without vsync I'm getting 70 fps" :facepalm: My bad.It's the server you're playing on. Find a new one. Share this post Link to post Share on other sites
aarnoman 13 Posted May 11, 2013 Hi. As I promised, I tested this out with my new 7870 (Sapphire Flex Edition), and get very good FPS. i noticed the only setting that really affected performance appeared to be antialiasing (set to normal seems to work well, but drops to ~30FPS when set to 8). From this, I can conclude that the problem here is not the video card.Specs for reference:-Intel i5-3570k (3.4GHz)-Sapphire HD 7870 (Flex Edition)-8GB Ram-Running at 1400x1050I am getting 60+ frames per second on normal/high settings (with antialiasing set to 'normal') except in some big cities.Hope this may be of use to the OP. Share this post Link to post Share on other sites
=DiG= Zgraphz 84 Posted May 12, 2013 (edited) "And no, CPU is not bottlenecking in anyway. I just tried Arma 2 and operation arrowhead campaign mode and I changed the settings to highest possible without vsync I'm getting 70 fps"let me tell you that arma 2 and dayz are completely different even though dayz is a mod of arma 2. The spawning of zombies takes the biggest toll, item spawning depending on the server. it could really demand processor and HDD/SSD read& write speeds along with a healthy GPU to support the graphic load and enough Ram to back it all up. you could go play arma 2 OA dominion on a realism server and get 90-120 fps average, switch over to dayz, Your Fps will drop like a bomb. Needles to say, more players, more often zombies spawn. more players, more time loot spawns. that all take's a very heavy toll on the server and your PC, unless, it has the power to run it without any issues. Edited May 12, 2013 by =DiG= Zgraphz Share this post Link to post Share on other sites