mrcyberdude 1 Posted August 23, 2012 FIX for Battleye all versions - Kicked client not responding - SOLVED.By changing the router settings.... YES inside the router settings. Encapsulation - LLC or VC MUXChange the encapsulation from VC MUX to LCCThis has solved weeks of not being able to connect to all servers with battleye for more than 30 seconds.Can a mod Please make a STICKY post of this.MrCyberdude 1 Share this post Link to post Share on other sites
RyanH100 20 Posted August 23, 2012 I would suggest making it more detailed for newbies. It looks very messy in it's current state. 1 Share this post Link to post Share on other sites
SgtFurry 2 Posted August 23, 2012 This 100% worked for me. 1 Share this post Link to post Share on other sites
mrcyberdude 1 Posted August 23, 2012 For help with your individual modem try http://portforward.com/ to at least get into the settings.It took me weeks to get this working and I installed Arma2 and 3 different mods about 9 times so I have done enough for now. Share this post Link to post Share on other sites
soo1ner 8 Posted August 24, 2012 Can someone explain this theres no VC or MUX or anything in my router settings... Share this post Link to post Share on other sites
SgtFurry 2 Posted August 24, 2012 Can someone explain this theres no VC or MUX or anything in my router settings...What modem do you have? some of the "better" modems have a LOT of setting. Some of the basic ones don't and some have expert setting which need to be enabled within your modem. This fix worked for a lot of people i know 100% and every time, we tested it out turning it on and off etc. Share this post Link to post Share on other sites
soo1ner 8 Posted August 24, 2012 What modem do you have? some of the "better" modems have a LOT of setting. Some of the basic ones don't and some have expert setting which need to be enabled within your modem. This fix worked for a lot of people i know 100% and every time, we tested it out turning it on and off etc.I have a belkin model f7d8302 Share this post Link to post Share on other sites
karb 1 Posted August 24, 2012 My modem was already set on LLC. I tried changeing it to VC MUX and it did nothing.Im in australia, QLD. I dont know if it is a proplem more common in my state.I had some luck with some youtube videos showing differnt things, They only bought me afew more minutes in game at best.Im just about ready to drop dayz. Nothing I do has made significant improvement. I may just forget about it until a standalone version comes to market. Share this post Link to post Share on other sites
soo1ner 8 Posted August 24, 2012 My modem was already set on LLC. I tried changeing it to VC MUX and it did nothing.Im in australia, QLD. I dont know if it is a proplem more common in my state.I had some luck with some youtube videos showing differnt things, They only bought me afew more minutes in game at best.Im just about ready to drop dayz. Nothing I do has made significant improvement. I may just forget about it until a standalone version comes to market.Were in the same (sinking) boat there Share this post Link to post Share on other sites
SgtFurry 2 Posted August 26, 2012 I would seriously try a friends modem first. I'm in Oz also and I have a high end billion modem/router. Also try to update your modem firmware.The belkin you have Scavenger looks like it has advanced setting,. check out the manual. http://cache-www.belkin.com/support/dl/MAN_F7D8302_v1_8820-00700_Play_N600_N_Router.pdfSince doing this we have had no issues and can be on for hours + Share this post Link to post Share on other sites
soo1ner 8 Posted August 26, 2012 I would seriously try a friends modem first. I'm in Oz also and I have a high end billion modem/router. Also try to update your modem firmware.The belkin you have Scavenger looks like it has advanced setting,. check out the manual. http://cache-www.bel...00_N_Router.pdfSince doing this we have had no issues and can be on for hours +My router does not support llc or or vc mux :( Share this post Link to post Share on other sites
BeNJaMMiiN 1 Posted August 27, 2012 I have a Belkin router and I cannot find the encapsulation settings to save my life.. Any tips? Share this post Link to post Share on other sites
jacobcrandall1992 0 Posted August 30, 2012 HELP! I am completely router stupid. I have a Netgear N600 router and am trying to find the LLC or VC MUX under settings. Either I don't know what I am looking at or it isnt there. Can someone please tell me where to go to find these settings? Share this post Link to post Share on other sites
soo1ner 8 Posted August 30, 2012 If you are a steam user you can try this. its been working for me http://dayzmod.com/forum/index.php?/topic/83759-battleye-not-responding-fix-steam-users/ Share this post Link to post Share on other sites
mrcyberdude 1 Posted September 2, 2012 (edited) I'm on iinet and I am currently using their iiNet branded BoBLite and the setting menu is located as below,After logging into your modem settings page.Normally this is one of the following depending on brand of modem.http://192.168.1.1 or http://192.168.1.254 or http://192.168.1.100 or http://10.1.1.1 or http://10.0.0.1 or http://10.0.0.2If you cannot get in then try this link http://portforward.c...routerindex.htm for more info on you brand of modem.5. Advanced Settings5. Internet setup & ADSL standardWan Configuration number --- Ethernet or VPI/VCI --- Encapsulation --- Protocol in useone -------------------------------- 8/35 ----------------------- LLC ---------------- PPPoAThen I click on the one which takes me to the modem menu where you enter your ISP user name and password.WAN configuration number 17. Encapsulation - LLC or VC MUXPick LLC and then make sure you save the settings and after then reboot the modem.MrCyberdude Edited September 2, 2012 by MrCyberdude Share this post Link to post Share on other sites
ElRolle 97 Posted September 2, 2012 You probably should have mentioned that LLC and VC MUX are only for people using PPPoE, so it's useless for 90% of people out there since they won't have the setting. Share this post Link to post Share on other sites
soo1ner 8 Posted September 3, 2012 You probably should have mentioned that LLC and VC MUX are only for people using PPPoE, so it's useless for 90% of people out there since they won't have the setting.yup. So if you are a steam user and you dont have this option try mine above Share this post Link to post Share on other sites
mrcyberdude 1 Posted September 3, 2012 (edited) You probably should have mentioned that LLC and VC MUX are only for people using PPPoE, so it's useless for 90% of people out there since they won't have the setting.Wrong, I always run PPoA and after changing to LLC Battleye started working as soon as I rebooted the modem. Edited September 3, 2012 by MrCyberdude Share this post Link to post Share on other sites
SgtFurry 2 Posted September 3, 2012 Wrong, I always run PPoA and after changing to LLC Battleye started working as soon as I rebooted the modem.SAME +1 1 Share this post Link to post Share on other sites
soo1ner 8 Posted September 5, 2012 Wrong, I always run PPoA and after changing to LLC Battleye started working as soon as I rebooted the modem.PPoA is not available on all routers certainly not mine Share this post Link to post Share on other sites
Tureri 0 Posted December 9, 2012 There doesn't seem to be a way to change the PPPOA setting on a thomson modem hmmm....I did try something else last night and now my game works flawlessly. See my post on http://dayzmod.com/forum/index.php?/topic/92245-server-battleye-client-not-responding/It is the most recent reply to the topic (As of 9/12/12 AUS TIME) and it may or may not work for you.Yours SincerelyTureri Share this post Link to post Share on other sites
