Valish33 1 Posted December 21, 2018 @tyladrio could you help me? do you have discord? Share this post Link to post Share on other sites
tylandrio 0 Posted December 22, 2018 (edited) 15 hours ago, Valish33 said: @tyladrio could you help me? do you have discord? I Don´t use Discord ^^ i only use Teamspeak i Send you the Teamspeak infos via Message Edited December 22, 2018 by tylandrio Share this post Link to post Share on other sites
eggy785 8 Posted December 24, 2018 Bec is not working right no restarts no messages, it's broke. Share this post Link to post Share on other sites
tylandrio 0 Posted December 24, 2018 19 hours ago, eggy785 said: Bec is not working right no restarts no messages, it's broke. Not for me Everything works fine. Share this post Link to post Share on other sites
mrwolv 46 Posted January 5, 2019 On 24/12/2018 at 12:31 AM, eggy785 said: Bec is not working right no restarts no messages, it's broke. did you set the information like admin passwords server ports and ips in the correct places? Share this post Link to post Share on other sites
eggy785 8 Posted January 6, 2019 20 hours ago, mrwolv said: did you set the information like admin passwords server ports and ips in the correct places? yeah it was all setup right, have it working now. 1 Share this post Link to post Share on other sites
Stellyuk 0 Posted January 10, 2019 Hey guys, Dont seem to be able to get this to work for the older Dayz server I get that Battleye was unable to initialize :( Stelly Share this post Link to post Share on other sites
mrwolv 46 Posted January 10, 2019 1 hour ago, Stellyuk said: Hey guys, Dont seem to be able to get this to work for the older Dayz server I get that Battleye was unable to initialize :( Stelly make sure you set the bec files up passwords,ip and ports Share this post Link to post Share on other sites
Patrick Pollap 1 Posted February 11, 2019 On 11/14/2018 at 6:09 PM, LastS said: It didn't worked for me... I am getting the same message "incorrect login" Same here can anyone help me please 😞 ? Share this post Link to post Share on other sites
mrwolv 46 Posted February 12, 2019 (edited) 2 hours ago, Patrick Pollap said: Same here can anyone help me please 😞 ? On 1/10/2019 at 7:45 PM, Stellyuk said: Hey guys, Dont seem to be able to get this to work for the older Dayz server I get that Battleye was unable to initialize 😞 Stelly if your getting incorrect login it means you havent set your password in the file/s make sure you have added in BEServer_x64.cfg the following RConPassword PASSWORDHERE RestrictRCon 0 RConPort 2302 RConIP SERVERIPHERE then in your battleye\Bec\Config\Config.cfg file [Bec] Ip = SERVERIPHERE Port = 2302 BePath = BATTLEYEFOLDER Admins = admins.xml Commands = commands.xml LogDir = Config Make sure you have set the information correctly in ServerDZ.cfg hostname = "####"; // Server name password = ""; // Password for connection to the server passwordAdmin = "#####"; // Password to become server admin AND battleye password steamQueryPort = 2302; // Steam Query Port If you want a 6 hour restart here is a Scheduler <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <Scheduler> <!-- Repeating messages every 5 minutes --> <job id="0"> <time>001500</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 MESSAGE 1 </cmd> <cmdtype>0</cmdtype> </job> <job id="1"> <time>000900</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 MESSAGE 2</cmd> <cmdtype>0</cmdtype> </job> <job id="2"> <time>001700</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 MESSAGE 3</cmd> <cmdtype>0</cmdtype> </job> <job id="3"> <time>002100</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 MESSAGE 4 </cmd> <cmdtype>0</cmdtype> </job> <job id="4"> <time>002700</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 MESSAGE 5 </cmd> <cmdtype>0</cmdtype> </job> <job id="5"> <time>003000</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 MESSAGE 6</cmd> <cmdtype>0</cmdtype> </job> <job id="6"> <time>003300</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 This server restarts every 6 hours , 12am, 6pm,12pm, 6am</cmd> <cmdtype>0</cmdtype> </job> <!-- End repeat messages --> <!-- 06:00am restart --> <job id="7"> <time>05:55:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 5 minutes</cmd> <cmdtype>0</cmdtype> </job> <job id="8"> <time>05:57:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 3 minutes</cmd> <cmdtype>0</cmdtype> </job> <job id="9"> <time>05:59:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 1 minute</cmd> <cmdtype>0</cmdtype> </job> <job id="10"> <time>05:59:50</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server is now restarting</cmd> <cmdtype>0</cmdtype> </job> <job id="11"> <time>06:00:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>#shutdown</cmd> <cmdtype>0</cmdtype> </job> <!-- End 06:00am restart --> <!-- 12:00 noon restart --> <job id="12"> <time>11:55:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 5 minutes</cmd> <cmdtype>0</cmdtype> </job> <job id="13"> <time>11:57:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 3 minutes</cmd> <cmdtype>0</cmdtype> </job> <job id="14"> <time>11:59:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 1 minute</cmd> <cmdtype>0</cmdtype> </job> <job id="15"> <time>11:59:50</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server is now restarting</cmd> <cmdtype>0</cmdtype> </job> <job id="16"> <time>12:00:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>#shutdown</cmd> <cmdtype>0</cmdtype> </job> <!-- End 12:00 noon restart --> <!-- 00:00 restart --> <job id="22"> <time>23:55:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 5 minutes</cmd> <cmdtype>0</cmdtype> </job> <job id="23"> <time>23:57:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 3 minutes</cmd> <cmdtype>0</cmdtype> </job> <job id="24"> <time>23:59:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 1 minute</cmd> <cmdtype>0</cmdtype> </job> <job id="25"> <time>23:59:50</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server is now restarting</cmd> <cmdtype>0</cmdtype> </job> <job id="26"> <time>00:00:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>#shutdown</cmd> <cmdtype>0</cmdtype> </job> <!-- End 00:00 restart follows on to 6am --> </Scheduler> Edited February 12, 2019 by mrwolv Share this post Link to post Share on other sites
Patrick Pollap 1 Posted February 12, 2019 (edited) 11 hours ago, mrwolv said: if your getting incorrect login it means you havent set your password in the file/s make sure you have added in BEServer_x64.cfg the following RConPassword PASSWORDHERE RestrictRCon 0 RConPort 2302 RConIP SERVERIPHERE then in your battleye\Bec\Config\Config.cfg file [Bec] Ip = SERVERIPHERE Port = 2302 BePath = BATTLEYEFOLDER Admins = admins.xml Commands = commands.xml LogDir = Config Make sure you have set the information correctly in ServerDZ.cfg hostname = "####"; // Server name password = ""; // Password for connection to the server passwordAdmin = "#####"; // Password to become server admin AND battleye password steamQueryPort = 2302; // Steam Query Port If you want a 6 hour restart here is a Scheduler <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <Scheduler> <!-- Repeating messages every 5 minutes --> <job id="0"> <time>001500</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 MESSAGE 1 </cmd> <cmdtype>0</cmdtype> </job> <job id="1"> <time>000900</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 MESSAGE 2</cmd> <cmdtype>0</cmdtype> </job> <job id="2"> <time>001700</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 MESSAGE 3</cmd> <cmdtype>0</cmdtype> </job> <job id="3"> <time>002100</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 MESSAGE 4 </cmd> <cmdtype>0</cmdtype> </job> <job id="4"> <time>002700</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 MESSAGE 5 </cmd> <cmdtype>0</cmdtype> </job> <job id="5"> <time>003000</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 MESSAGE 6</cmd> <cmdtype>0</cmdtype> </job> <job id="6"> <time>003300</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>1</loop> <cmd>say -1 This server restarts every 6 hours , 12am, 6pm,12pm, 6am</cmd> <cmdtype>0</cmdtype> </job> <!-- End repeat messages --> <!-- 06:00am restart --> <job id="7"> <time>05:55:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 5 minutes</cmd> <cmdtype>0</cmdtype> </job> <job id="8"> <time>05:57:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 3 minutes</cmd> <cmdtype>0</cmdtype> </job> <job id="9"> <time>05:59:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 1 minute</cmd> <cmdtype>0</cmdtype> </job> <job id="10"> <time>05:59:50</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server is now restarting</cmd> <cmdtype>0</cmdtype> </job> <job id="11"> <time>06:00:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>#shutdown</cmd> <cmdtype>0</cmdtype> </job> <!-- End 06:00am restart --> <!-- 12:00 noon restart --> <job id="12"> <time>11:55:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 5 minutes</cmd> <cmdtype>0</cmdtype> </job> <job id="13"> <time>11:57:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 3 minutes</cmd> <cmdtype>0</cmdtype> </job> <job id="14"> <time>11:59:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 1 minute</cmd> <cmdtype>0</cmdtype> </job> <job id="15"> <time>11:59:50</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server is now restarting</cmd> <cmdtype>0</cmdtype> </job> <job id="16"> <time>12:00:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>#shutdown</cmd> <cmdtype>0</cmdtype> </job> <!-- End 12:00 noon restart --> <!-- 00:00 restart --> <job id="22"> <time>23:55:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 5 minutes</cmd> <cmdtype>0</cmdtype> </job> <job id="23"> <time>23:57:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 3 minutes</cmd> <cmdtype>0</cmdtype> </job> <job id="24"> <time>23:59:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server will restart in 1 minute</cmd> <cmdtype>0</cmdtype> </job> <job id="25"> <time>23:59:50</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>say -1 This server is now restarting</cmd> <cmdtype>0</cmdtype> </job> <job id="26"> <time>00:00:00</time> <delay>000000</delay> <day>1,2,3,4,5,6,7</day> <loop>0</loop> <cmd>#shutdown</cmd> <cmdtype>0</cmdtype> </job> <!-- End 00:00 restart follows on to 6am --> </Scheduler> I did all correct but same error cant Connect TO server Failed To Login Trying Reconnect. https://imgur.com/aLQI4mg Edited February 12, 2019 by Patrick Pollap Share this post Link to post Share on other sites
Killerfeed 0 Posted February 12, 2019 (edited) Hi everyone, I have a problem with BEC, any suggestions? Thanks! https://i.gyazo.com/e602900288478b49cf4728996848a57d.png The IP address that image shows isn't mine, how can i change that? The server starts and works correctly, the problem is that the BEC gives an error and restarts constantly Edited February 12, 2019 by Killerfeed Share this post Link to post Share on other sites
ghost squad 1 Posted February 12, 2019 lol you need to remove # ADD YOUR IP :D 1 Share this post Link to post Share on other sites
Patrick Pollap 1 Posted February 12, 2019 Spoiler @echo off TITLE DayZ SA Server - Status COLOR 0A :: Variables:: ::DayZServer_64.exe path set DAYZ-SA_SERVER_LOCATION="C:\Program Files (x86)\Steam\steamapps\common\DayZServer" ::Bec.exe path set BEC_LOCATION="C:\Program Files (x86)\Steam\steamapps\common\DayZServer\battleye\BEC" :::::::::::::: echo Agusanz goto checksv pause :checksv tasklist /FI "IMAGENAME eq DayZServer_x64.exe" 2>NUL | find /I /N "DayZServer_x64.exe">NUL if "%ERRORLEVEL%"=="0" goto checkbec cls echo Server is not running, taking care of it.. goto killsv :checkbec tasklist /FI "IMAGENAME eq Bec.exe" 2>NUL | find /I /N "Bec.exe">NUL if "%ERRORLEVEL%"=="0" goto loopsv cls echo Bec is not running, taking care of it.. goto startbec :loopsv FOR /L %%s IN (30,-1,0) DO ( cls echo Server is running. Checking again in %%s seconds.. timeout 1 >nul ) goto checksv :killsv taskkill /f /im Bec.exe taskkill /f /im DayZServer_x64.exe goto startsv :startsv cls echo Starting DayZ SA Server. timeout 1 >nul cls echo Starting DayZ SA Server.. timeout 1 >nul cls echo Starting DayZ SA Server... cd "%DAYZ-SA_SERVER_LOCATION%" start start2.bat -config=serverDZ.cfg -port=2302 -dologs -adminlog -netlog -freezecheck -noFilePatching "-BEpath=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\Battleye" -profiles=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\PlayerLogs FOR /L %%s IN (45,-1,0) DO ( cls echo Initializing server, wait %%s seconds to initialize Bec.. timeout 1 >nul ) goto startbec :startbec cls echo Starting Bec. timeout 1 >nul cls echo Starting Bec.. timeout 1 >nul cls echo Starting Bec... timeout 1 >nul cd "%BEC_LOCATION%" start Bec.exe -f Config.cfg goto checksv That is my Startbec.bat Then Bec Config Spoiler [Bec] Ip = 84.200.92.227 Port = 2302 BePath = C:\Program Files (x86)\Steam\steamapps\common\DayZServer\Battleye Admins = admins.xml Commands = commands.xml LogDir = Config Spoiler RConPassword "is set" its for forum post RestrictRCon 0 RConPort 2302 RConIP 84.200.92.227 Can anyone help ? BEC Cant connect to server Login fail Trying Reconnect ? :(( i try all the stuff here but didnt work 1 Share this post Link to post Share on other sites
Killerfeed 0 Posted February 12, 2019 (edited) 1 hour ago, ghost squad said: lol you need to remove # ADD YOUR IP 😄 Done 😂 but it still does'nt work "Failed to login" https://imgur.com/a/ezN4Lw5 Edited February 12, 2019 by Killerfeed Share this post Link to post Share on other sites
Killerfeed 0 Posted February 12, 2019 10 minutes ago, Patrick Pollap said: Hide contents [Bec] Ip = 84.200.92.227 Port = 2302 BePath = C:\Program Files (x86)\Steam\steamapps\common\DayZServer\Battleye Admins = admins.xml Commands = commands.xml LogDir = Config Can anyone help ? BEC Cant connect to server Login fail Trying Reconnect ? :(( i try all the stuff here but didnt work Same problem Share this post Link to post Share on other sites
Patrick Pollap 1 Posted February 12, 2019 22 minutes ago, Killerfeed said: Same problem yea got it ! BePath = C:\Program Files (x86)\Steam\steamapps\common\DayZServer\Battleye <- copy&paste in you startparameter from server , then it works for me idk why 1 Share this post Link to post Share on other sites
Killerfeed 0 Posted February 12, 2019 (edited) Ok I changed some things but I need to know if the BEC is really working, I post an image. If it works, I post the solution https://imgur.com/a/6eCtWLk Edited February 12, 2019 by Killerfeed Share this post Link to post Share on other sites
mrwolv 46 Posted February 12, 2019 2 hours ago, Patrick Pollap said: yea got it ! BePath = C:\Program Files (x86)\Steam\steamapps\common\DayZServer\Battleye <- copy&paste in you startparameter from server , then it works for me idk why 1 hour ago, Killerfeed said: Ok I changed some things but I need to know if the BEC is really working, I post an image. If it works, I post the solution https://imgur.com/a/6eCtWLk Yes aslong as you point it to your battleye folder in your Server folder you will be good dont point it to your dayz game folder it must be your Server folder Share this post Link to post Share on other sites
mrwolv 46 Posted February 12, 2019 1 hour ago, Killerfeed said: Ok I changed some things but I need to know if the BEC is really working, I post an image. If it works, I post the solution https://imgur.com/a/6eCtWLk yes its working as it says connected and then you should see yourself via dart rcon Share this post Link to post Share on other sites
Killerfeed 0 Posted February 12, 2019 (edited) On 9/28/2018 at 6:07 PM, SmashT said: So I was getting the following error: Failed to login. I solved this by changing my -BEpath on line 52 of Start Server Battleye.bat from -BEpath =C:\Program Files (x86)\Steam\steamapps\common\DayZServer\battleye to "-BEpath=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\battleye" So it now looks like this for me: start DayZServer_x64.exe -config=serverDZ.cfg ip=127.0.0.1 -port=2302 -dologs -adminlog -netlog -freezecheck -noFilePatching "-BEpath=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\battleye" -profiles=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\PlayerLogs I also added --dsc to line 71 but I don't think this was actually needed for me. start Bec.exe -f Config.cfg --dsc It works, solved! 😉 BEC connected and working. But... i have other problem. Since I installed the BEC the mods don't work fine (Comunity Tools, Permissions framworks, etc) I see the interface of Comunity Tools but I can't see any player in the server list, nor teleport, nor respawn objects. https://imgur.com/a/M774gQU Last night works perfectly Edited February 12, 2019 by Killerfeed Share this post Link to post Share on other sites
SmashT 10907 Posted February 13, 2019 7 hours ago, Killerfeed said: It works, solved! 😉 BEC connected and working. But... i have other problem. Since I installed the BEC the mods don't work fine (Comunity Tools, Permissions framworks, etc) I see the interface of Comunity Tools but I can't see any player in the server list, nor teleport, nor respawn objects. https://imgur.com/a/M774gQU Last night works perfectly Post your startup bat. 1 Share this post Link to post Share on other sites
Killerfeed 0 Posted February 13, 2019 2 hours ago, SmashT said: Post your startup bat. My start.bat Quote @echo off taskkill /F /IM DayZServer_x64.exe /T start DayZServer_x64.exe -scrAllowFileWrite -config=serverDZ.cfg -port=2302 "-profiles=ServerProfile" -dologs -adminlog -freezecheck -scriptDebug=true -cpuCount=4 "-mod=@RPCFramework;@Permissions-Framework;@Community-Online-Tools" My Start Server Battleye Quote @echo off TITLE DayZ SA Server - Status COLOR 0A :: Variables:: ::DayZServer_64.exe path set DAYZ-SA_SERVER_LOCATION=C:\Program Files (x86)\Steam\steamapps\common\DayZServer ::Bec.exe path set BEC_LOCATION=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\battleye\Bec :::::::::::::: echo Agusanz goto checksv pause :checksv tasklist /FI "IMAGENAME eq DayZServer_x64.exe" 2>NUL | find /I /N "DayZServer_x64.exe">NUL if "%ERRORLEVEL%"=="0" goto checkbec cls echo Server is not running, taking care of it.. goto killsv :checkbec tasklist /FI "IMAGENAME eq Bec.exe" 2>NUL | find /I /N "Bec.exe">NUL if "%ERRORLEVEL%"=="0" goto loopsv cls echo Bec is not running, taking care of it.. goto startbec :loopsv FOR /L %%s IN (30,-1,0) DO ( cls echo Server is running. Checking again in %%s seconds.. timeout 1 >nul ) goto checksv :killsv taskkill /f /im Bec.exe taskkill /f /im DayZServer_x64.exe goto startsv :startsv cls echo Starting DayZ SA Server. timeout 1 >nul cls echo Starting DayZ SA Server.. timeout 1 >nul cls echo Starting DayZ SA Server... cd "%DAYZ-SA_SERVER_LOCATION%" start DayZServer_x64.exe -config=serverDZ.cfg ip=81.37.173.141 -port=2302 -dologs -adminlog -netlog -freezecheck -noFilePatching "-BEpath=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\battleye" -profiles=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\PlayerLogs FOR /L %%s IN (45,-1,0) DO ( cls echo Initializing server, wait %%s seconds to initialize Bec.. timeout 1 >nul ) goto startbec :startbec cls echo Starting Bec. timeout 1 >nul cls echo Starting Bec.. timeout 1 >nul cls echo Starting Bec... timeout 1 >nul cd "%BEC_LOCATION%" start Bec.exe -f Config.cfg goto checksv I create folder PlayerLogs but is empty Before installing the BEC I had another folder of permissions that worked, this one that is seen in screen. C:\Program Files (x86)\Steam\steamapps\common\DayZServer\ServerProfile\PermissionsFramework Thanks for your help 😉 Share this post Link to post Share on other sites
SmashT 10907 Posted February 13, 2019 (edited) You don't have any of the mods added in your "Start Server Battleye" bat? That explains why it was working with your old start bat as you did have them there. Try replacing this: start DayZServer_x64.exe -config=serverDZ.cfg ip=81.37.173.141 -port=2302 -dologs -adminlog -netlog -freezecheck -noFilePatching "-BEpath=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\battleye" -profiles=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\PlayerLogs With this: start DayZServer_x64.exe -config=serverDZ.cfg ip=81.37.173.141 -port=2302 -dologs -adminlog -netlog -freezecheck -noFilePatching "-mod=@RPCFramework;@Permissions-Framework;@Community-Online-Tools;" "-scrAllowFileWrite" "-BEpath=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\battleye" "-profiles=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\PlayerLogs" Edited February 13, 2019 by SmashT Share this post Link to post Share on other sites
Killerfeed 0 Posted February 13, 2019 (edited) 5 hours ago, SmashT said: You don't have any of the mods added in your "Start Server Battleye" bat? That explains why it was working with your old start bat as you did have them there. Try replacing this: start DayZServer_x64.exe -config=serverDZ.cfg ip=81.37.173.141 -port=2302 -dologs -adminlog -netlog -freezecheck -noFilePatching "-BEpath=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\battleye" -profiles=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\PlayerLogs With this: start DayZServer_x64.exe -config=serverDZ.cfg ip=81.37.173.141 -port=2302 -dologs -adminlog -netlog -freezecheck -noFilePatching "-mod=@RPCFramework;@Permissions-Framework;@Community-Online-Tools;" "-scrAllowFileWrite" "-BEpath=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\battleye" "-profiles=C:\Program Files (x86)\Steam\steamapps\common\DayZServer\PlayerLogs" Mod doesn't work now or can't recognize me as administrator (i logged like admin) Edited February 13, 2019 by Killerfeed Share this post Link to post Share on other sites
