Munson_fry (DayZ) 312 Posted March 4, 2015 Does the damaged Status decrease accuracy ? Or havent they modeld that yet.in that case i would bei a Lucky bastardThx in advanceMunson Share this post Link to post Share on other sites
ruullor 56 Posted March 4, 2015 Does the damaged Status decrease accuracy ? Or havent they modeld that yet.in that case i would bei a Lucky bastardThx in advanceMunsongood question, I dont know either, as far as I know it just makes it harder to see through Share this post Link to post Share on other sites
EvilTigerAce 131 Posted March 4, 2015 It only has negative visual effects (cracks) for you as far as I know. Share this post Link to post Share on other sites
Wookieenoob 191 Posted March 4, 2015 (edited) no negative effects, i have one in invent on my akm atm in that condition only some scopes have damage from condition but it seems the zoom-y ones don't. Edited March 4, 2015 by Wookieenoob Share this post Link to post Share on other sites
yazar8 584 Posted March 4, 2015 no negative effects, i have one in invent on my akm atm in that condition only some scopes have damage from condition but it seems the zoom-y ones don't.ACOG does. Share this post Link to post Share on other sites
Santa fox 53 Posted March 4, 2015 Fairly sure my friend and I figured out they DID have decreased accuracy when broken, i.e. to the point of cracks in the glass. Share this post Link to post Share on other sites
Wookieenoob 191 Posted March 4, 2015 Fairly sure my friend and I figured out they DID have decreased accuracy when broken, i.e. to the point of cracks in the glass. i dont actually see the cracks. im guessing LRS and PSO-1 are currently unfinished. i wouldn't be able to use a damaged ACOG to fire nice shots but i can see the entire reticle with this damaged PSO-1. just like i can see fine through damaged/worn/any LRS Share this post Link to post Share on other sites
Santa fox 53 Posted March 4, 2015 i dont actually see the cracks. im guessing LRS and PSO-1 are currently unfinished. i wouldn't be able to use a damaged ACOG to fire nice shots but i can see the entire reticle with this damaged PSO-1. just like i can see fine through damaged/worn/any LRS Once a PSO-1 scope goes below worn, I see cracks similiar to the ACOG. I can still see through it, albeit nowhere near as good as before, so I usually discard them. Though, in regards to the accuracy, I believe it DOES decrease it. Share this post Link to post Share on other sites
Jex 1104 Posted March 4, 2015 I had a damaged one on my AKM which had the wooden parts and stock and the gun wrap i made. The scope said damaged but was clear to look through so i just assumed it was bugged. After the update, PSO gone, no stock or gun wrap :( Share this post Link to post Share on other sites
EvilTigerAce 131 Posted March 7, 2015 I had a damaged one on my AKM which had the wooden parts and stock and the gun wrap i made. The scope said damaged but was clear to look through so i just assumed it was bugged. After the update, PSO gone, no stock or gun wrap :( Same, all the attachments were gone. 1 Share this post Link to post Share on other sites
Munson_fry (DayZ) 312 Posted March 7, 2015 After doing some test myself ( wooden buttstock and foregrip both pristine ) i thing that there is no penalty for usIng a damged pso 1.i could shoot Zds up to 500 m easy while beeing prone . Share this post Link to post Share on other sites
Wookieenoob 191 Posted March 7, 2015 After doing some test myself ( wooden buttstock and foregrip both pristine ) i thing that there is no penalty for usIng a damged pso 1.i could shoot Zds up to 500 m easy while beeing prone . like i was saying. the long ranged scope and PSO-1 are not modeled below pristine. all the scopes appear as pristine. people go for pristine for no real reason right now. the scope works just as well as a pristine LRS with mosin (tested) just like there are no damaged models in use for bayonets currently. 1 Share this post Link to post Share on other sites
