Emmu 18 Posted July 29, 2012 They don't lie when they say they're easily rolled. Anyway to unroll them without use of another vehicle. Or will we just have to wait for a "Unflip" command to be put in. Ps green mountain. Share this post Link to post Share on other sites
Colditz 54 Posted July 29, 2012 I'd love an "unscrew" command on pretty much every vehicle, they seem to explode/flip at any given chance. For now I'm afraid we can only drive "safely" with ATV's, whenever I'm riding one I usually slow down when approaching bumps or going offroad. Seeing as finding another vehicle to flip said ATV over if it landed on the back is next to impossible we can only hope for a "flip vehicle" function to be implemented. All that being said, flipped vehicles will be upright again if the server restarts. Save the vehicle, mark the spot and check back later. Share this post Link to post Share on other sites
mr_seacucumber 81 Posted July 29, 2012 Stay away from bridges, vally's, rocks, ditches and anything else that is not a road :P Share this post Link to post Share on other sites
Emmu 18 Posted July 29, 2012 Stay away from bridges, vally's, rocks, ditches and anything else that is not a road :PTapped the smallest thing , wasn't going above 10 and this thing just does the most beautiful barrel roll i have ever seen haha. Share this post Link to post Share on other sites
Quisari (DayZ) 5 Posted July 29, 2012 (edited) when i use them i normaly go full speed at all times.. never had a problem xDand that is offroad as well :) Edited July 29, 2012 by Quisari Share this post Link to post Share on other sites
Emmu 18 Posted July 29, 2012 when i use them i normaly go full speed at all times.. never had a problem xDand that is offroad as well :)You're truly blessed then. Share this post Link to post Share on other sites
zamp 4 Posted July 29, 2012 When you flip the ATV don't get out.If you're sideways on the left side just turn wheels to max right and back up. Another player will need to give you a push (run into) it to make it move just a micrometer required to get it to start turning upright.It'll start to turn upright very slowly but just keep both D and S held down until it uprights. Share this post Link to post Share on other sites