Help! I can't figure this out.

[Hazzisoul 0]

So this has been going on for a few days because I've tried every possible solution to no avail. I've gone through searching any forum I can think of as far as anyone else having this issue. Basically what is happening is as I launch DayZ, I get a black screen. After a few seconds I clicked my mouse on the black screen and get a Not Responding pop-up. I close the Pop-up and get a Code for 0xCFFFFFFF - STATUS_APLICATION_HANG. I tried launching with both Steam and DayZ Launcher, both gave the same results and same code. I've checked for updates on my graphics, Windows OS, and the game itself. I've tried playing on official servers with no Mods, as well as bulldozer. I've unsubed from all mods, uninstalled and reinstalled , verified files. Etc. Can I please get some aid here. Going bonkers trying to figure this out.

I played the game in 1920 and would play it as windowed, I did Alt+Tab when distracted.

PC Specs - CPU: AMD 5800X; GPU Radeon RX 6600XT; RAM: 48GB (2x8GB,2x16GB); HDD: (2x) 4TB WD Black; MOB: Asrock X570S PG Riptide.

[Rico-dd7211f67c68f721 0]

My buddy is having the same issue and honestly after going through hours of various fixes and solutions nothing is working. Reinstalling the game, validating, even trying to play through experimental does nothing. One thing we noticed is that ram usage goes to 97%. Someone suggested that it might be client side hardware issue but when you have 32GB of ram and every other game works easily on max setting and even ray tracing.

[Sid Debian 147]

As suggestion - I suggest you to checkout your temperature of CPU, GPU and SSD if you're using it.

Application hanging only because of 4 possible reason.

1. Too high temperature (not enough to restart system by BSoD, but enough to reduce CPU Clock by BIOS, for reducing amount of calculations and temperature).

2. Hight temperature for GPU (GPU by own bios trying to protect it self from meltdown, with the same resolution slowing calculation amount and clocking values for attempt to cooling GPU card.

3. Highly RAM temperature - causing memory page failure, overheating of RAM chips and because of temperature reduced the speed of RAM switching states.

4. SSD speed might be sliwed down becase of any chip has one basic issue - if it's overhead - it's going slower and slower, because of crystalline structure became more separated and might starting of collapsing actions inside of chips structure, mext step might be a "memory page corruption" or death of drive because of melting of controller.

 

Why all of that happening - temperature of PC components and high clocking values (fast reading and writing operations) may corrupt your system, it's a kind of school knowledges about basic physics (thermodynamics, electronics) and chemistry. Exception STATUS_APPLICATION_HANG might be caused only by memory or calculation (CPU/GPU) failure, that status reports that executable trying to allocate resources and awaiting when OS will allocate 'em. Because of slowing down of some parameters of system increased time for locking resources, same may happens of failure of allocation memory or even IO operations (HDD/SSD and RAM).

Check out state of your system, that might be that it's already damaged...

P.S.

I gave you an idea - you shall make a choice: checkout or don't give a heck, but it's your choice.