OsMagnus 0 Posted June 29, 2020 Hey guys, asking for some advise here. I am new...ish to dayz of ps4 (1 month in) and I finally found a location to build a base. I fenced up a wall and turned it into a gate on the inside of a 3rd story town house on the inside of the door. the gate worked fine until I went to loot the town. I put the combination lock on and left. When I returned I realized that the combination lock was being blocked by the 2 doors that open inward which obstruct the view to the combination lock. I though I could tear the gate down from the outside, but once I removed the paneling with a pickaxe I was unable to tear down the frame. I went out and looted an axe, hatch, wood saw, hack saw, and crowbar believing I need a special tool to destroy the frame, but nothing is allowing the back in. Is there any was to get through the frame at this point or is it a lost cause?? PS- I have tried to glitch through the fence and even jumping from a balcony to the window but that was a bad idea. Any advise will be greatly appreciated. Thank you for your time and knowledge. -OsMagnus Share this post Link to post Share on other sites
OsMagnus 0 Posted June 29, 2020 The axe just passes through the fence frame, as well as wood and hack saws, sledgehammer, shovel, pickaxe, hatchets, pliers, wrench, hammers, etc. I guess shooting it is out of the question? or might that work? I believe that i need to cut my losses and accept the material-to-knowledge trade to the DAYZ GODS for the ultimate impermeable base. Any other advise will be much appreciated? Share this post Link to post Share on other sites
