[Help Needed] Server Scheduler Code Issue (Have I Made A Mistake?)

[DeepEuphoria 69]

Hello everyone,

 

I run a few Private servers, recently I changed some of our Scheduled server messages in the BEC Scheduler.xml and some how broke the scheduler :rolleyes:

I've put a ticket in to Fragnet, but as good as they are, they can't see the reason why it's not working. I'm sure it's just a typo or code issue, but I cannot see it. I don't know if it's the "Loop Number", or "Job ID".... :(

So could some kind person take a look and let me know if you see the issue please.

<?xml version="1.0"?><Scheduler>        <!-- READ http://ibattle.org/install-and-configure/setting-up-the-scheduler/ -->    <job id="0">        <runtime>001000</runtime>        <start>000000</start>        <day>1,2,3,4,5,6,7</day>        <loop>6</loop>         <cmd>say -1 Message Goes Here</cmd>           <cmdtype>0</cmdtype>                </job>        <job id="1">        <runtime>001210</runtime>        <start>000000</start>        <day>1,2,3,4,5,6,7</day>         <loop>6</loop>         <cmd>say -1 Message Goes Here</cmd>            <cmdtype>0</cmdtype>                </job>        <job id="2">        <runtime>001425</runtime>        <start>000000</start>        <day>1,2,3,4,5,6,7</day>         <loop>6</loop>         <cmd>say -1 Message Goes Here</cmd>            <cmdtype>0</cmdtype>                 </job>            <job id="3">        <runtime>001642</runtime>        <start>000000</start>        <day>1,2,3,4,5,6,7</day>        <loop>6</loop>         <cmd>say -1 Message Goes Here</cmd>            <cmdtype>0</cmdtype>                </job>        </Scheduler>

Regards

Edited September 4, 2015 by euphoria4949

[cedrico85 20]

Hello everyone,

 

I run a few Private servers, recently I changed some of our Scheduled server messages in the BEC Scheduler.xml and some how broke the scheduler :rolleyes:

I've put a ticket in to Fragnet, but as good as they are, they can't see the reason why it's not working. I'm sure it's just a typo or code issue, but I cannot see it. I don't know if it's the "Loop Number", or "Job ID".... :(

So could some kind person take a look and let me know if you see the issue please.

<?xml version="1.0"?><Scheduler>        <!-- READ http://ibattle.org/install-and-configure/setting-up-the-scheduler/ -->    <job id="0">        <runtime>001000</runtime>        <start>000000</start>        <day>1,2,3,4,5,6,7</day>        <loop>6</loop>         <cmd>say -1 Message Goes Here</cmd>           <cmdtype>0</cmdtype>                </job>        <job id="1">        <runtime>001210</runtime>        <start>000000</start>        <day>1,2,3,4,5,6,7</day>         <loop>6</loop>         <cmd>say -1 Message Goes Here</cmd>            <cmdtype>0</cmdtype>                </job>        <job id="2">        <runtime>001425</runtime>        <start>000000</start>        <day>1,2,3,4,5,6,7</day>         <loop>6</loop>         <cmd>say -1 Message Goes Here</cmd>            <cmdtype>0</cmdtype>                 </job>            <job id="3">        <runtime>001642</runtime>        <start>000000</start>        <day>1,2,3,4,5,6,7</day>        <loop>6</loop>         <cmd>say -1 Message Goes Here</cmd>            <cmdtype>0</cmdtype>                </job>        </Scheduler>

Regards

Hey, 

 

No your code is fine ! 

 

But to you have check if in your ACP , if you set the BEC on ? 

if he is Off your scheduler will not work 

 

If still not working i can give mine to try ! 

 

Cya

[DeepEuphoria 69]

Hey, 

 

No your code is fine ! 

 

But to you have check if in your ACP , if you set the BEC on ? 

if he is Off your scheduler will not work 

 

If still not working i can give mine to try ! 

 

Cya

 

Hi, yes I did check if the Scheduler was Enabled. It still does not work. It must be something with the "Loop" or "ID"...???

Edited September 4, 2015 by euphoria4949

[MadMcardle 175]

Hey man, I know I am with a different company but the code should still work the same, this is the standard code, try it if you want?

 

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

 

<!--

 

Web Doc : http://www.ibattle.org/install-and-configure/setting-up-the-scheduler/

 

 

Default setup: Restarts every 4 hours with 15, 10, 5 and 1 minute warnings

 

-->

 

 

<Scheduler>

    <!-- Repeating messages -->

    <job id="0">

        <time>000200</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>1</loop>

        <cmd>say -1 TEST</cmd>

        <cmdtype>0</cmdtype>

    </job>

 

    <job id="1">

        <time>000500</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>1</loop>

        <cmd>say -1 TEST</cmd>

        <cmdtype>0</cmdtype>

    </job>

 

    <job id="2">

        <time>000700</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>1</loop>

        <cmd>say -1 TEST</cmd>

        <cmdtype>0</cmdtype>

    </job>

 

    <job id="3">

        <time>001100</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>1</loop>

        <cmd>say -1 TEST</cmd>

        <cmdtype>0</cmdtype>

    </job>

 

    <job id="4">

        <time>001700</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>1</loop>

        <cmd>say -1 This server restarts every 4 hours</cmd>

        <cmdtype>0</cmdtype>

    </job>

    <!-- End repeat messages -->

 

    <!-- Restarts -->

    <job id="5">

        <time>034500</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>0</loop>

        <cmd>say -1 This server will restart in 15 minutes</cmd>

        <cmdtype>0</cmdtype>

    </job>

    <job id="6">

        <time>035000</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>0</loop>

        <cmd>say -1 This server will restart in 10 minutes</cmd>

        <cmdtype>0</cmdtype>

    </job>

    <job id="7">

        <time>035500</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>0</loop>

        <cmd>say -1 This server will restart in 5 minutes</cmd>

        <cmdtype>0</cmdtype>

    </job>

    <job id="8">

        <time>035900</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>0</loop>

        <cmd>say -1 This server will restart in 1 minute</cmd>

        <cmdtype>0</cmdtype>

    </job>

    <job id="9">

        <time>040000</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>0</loop>

        <cmd>#shutdown</cmd>

        <cmdtype>0</cmdtype>

    </job>

    <!-- End Restarts -->

</Scheduler>

[cedrico85 20]

 

Hey man, I know I am with a different company but the code should still work the same, this is the standard code, try it if you want?

 

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

 

<!--

 

Web Doc : http://www.ibattle.org/install-and-configure/setting-up-the-scheduler/

 

 

Default setup: Restarts every 4 hours with 15, 10, 5 and 1 minute warnings

 

-->

 

 

<Scheduler>

    <!-- Repeating messages -->

    <job id="0">

        <time>000200</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>1</loop>

        <cmd>say -1 TEST</cmd>

        <cmdtype>0</cmdtype>

    </job>

 

    <job id="1">

        <time>000500</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>1</loop>

        <cmd>say -1 TEST</cmd>

        <cmdtype>0</cmdtype>

    </job>

 

    <job id="2">

        <time>000700</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>1</loop>

        <cmd>say -1 TEST</cmd>

        <cmdtype>0</cmdtype>

    </job>

 

    <job id="3">

        <time>001100</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>1</loop>

        <cmd>say -1 TEST</cmd>

        <cmdtype>0</cmdtype>

    </job>

 

    <job id="4">

        <time>001700</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>1</loop>

        <cmd>say -1 This server restarts every 4 hours</cmd>

        <cmdtype>0</cmdtype>

    </job>

    <!-- End repeat messages -->

 

    <!-- Restarts -->

    <job id="5">

        <time>034500</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>0</loop>

        <cmd>say -1 This server will restart in 15 minutes</cmd>

        <cmdtype>0</cmdtype>

    </job>

    <job id="6">

        <time>035000</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>0</loop>

        <cmd>say -1 This server will restart in 10 minutes</cmd>

        <cmdtype>0</cmdtype>

    </job>

    <job id="7">

        <time>035500</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>0</loop>

        <cmd>say -1 This server will restart in 5 minutes</cmd>

        <cmdtype>0</cmdtype>

    </job>

    <job id="8">

        <time>035900</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>0</loop>

        <cmd>say -1 This server will restart in 1 minute</cmd>

        <cmdtype>0</cmdtype>

    </job>

    <job id="9">

        <time>040000</time>

        <delay>000000</delay>

        <day>1,2,3,4,5,6,7</day>

        <loop>0</loop>

        <cmd>#shutdown</cmd>

        <cmdtype>0</cmdtype>

    </job>

    <!-- End Restarts -->

</Scheduler>

 

Hey i try this before and it not work for me ! 

I have make it self 

 

Here take the mine and try if it works 

(works fine for me on my server)

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>	<!-- IMPORTANT: Visit www.ibattle.org for usage guides -->	<!-- Guide For Using Scheduler System: http://ibattle.org/install-and-configure/setting-up-the-scheduler/ -->		<!-- 2 Time Formats Can Be Used:		 00:00:00 - HH:MM:SS - Example, 02:30:00 would be 2:30am.  Messages using this format are sent based on the node's time.  It is recommend to set your ACP profile time to the same timezone as the node. 		 000000 - HHMMSS - Example, 003000 Is 30 Minutes From When Server Started	--><Scheduler>	<job id="0">		<time>000510</time>		<delay>000000</delay>		<day>1,2,3,4,5,6,7</day>		<loop>1</loop> 		<cmd>say -1 MESSAGE</cmd>			<cmdtype>0</cmdtype>			</job>		<job id="1">		<time>002200</time>		<delay>000000</delay>		<day>1,2,3,4,5,6,7</day>		<loop>1</loop> 		<cmd>say -1 MESSAGE</cmd>		<cmdtype>0</cmdtype>				</job>		<job id="2">		<time>002230</time>		<delay>000000</delay>		<day>1,2,3,4,5,6,7</day>		<loop>1</loop> 		<cmd>say -1 MESSAGE</cmd>			<cmdtype>0</cmdtype>			</job>	<job id="3">		<time>034700</time>		<delay>000000</delay>		<day>1,2,3,4,5,6,7</day>		<loop>0</loop> 		<cmd>say -1 *** AUTO RESTART IN 10 MIN ***</cmd>			<cmdtype>0</cmdtype>		</job>	<job id="4">		<time>035200</time>		<delay>000000</delay>		<day>1,2,3,4,5,6,7</day>		<loop>0</loop> 		<cmd>say -1 *** AUTO RESTART IN 5 MIN ***</cmd>		<cmdtype>0</cmdtype>	</job>	<job id="5">		<time>035600</time>		<delay>000000</delay>		<day>1,2,3,4,5,6,7</day>		<loop>0</loop> 		<cmd>say -1 *** AUTO RESTART IN 1 MIN ***</cmd>		<cmdtype>0</cmdtype>			</job>	</Scheduler>

[DeepEuphoria 69]

Thanks everyone, I found the issue. Characters "&" do not work and break the scheduler :rolleyes:

 

All sorted

[MadMcardle 175]

Ah glad you got it sorted man!

[Animal451 (DayZ) 1]

I seem to also be having trouble with my scheduler file. It worked with ,y first three messages but as soon as I added messages for the restart it stopped? I just can't seem to start a new thread?

[DeepEuphoria 69]

Post your schedule here so we can take a look. Also, which GSP you're with.