foolee 43 Posted January 19, 2015 It would be nice if DayZ Supported UPnP to dynamically open ports in firewalls. While I do have manual port forwards open on port 2302-2305 not all servers use those ports. It would be pretty sweet if the game confirmed the port that the server is on and opened it via UPnP in my router. I would also help with desync and latency for people whom lack the skill set to open ports in their routers. Share this post Link to post Share on other sites
Warhoax 63 Posted January 19, 2015 I thought steam handled the port the game used?As such that if you play with two clients in the same home network, you've got to configure steam to use another port?I might be completely wrong though :x. Share this post Link to post Share on other sites
foolee 43 Posted January 19, 2015 If Steam does do port handling then its broken on my Linksys E4200 w/DD-WRT installed. As when Im playing no ports are opened by anything. Unlike my Xbox360, Utorrent and other clients.I have also played with 2x people on one connection, actually play with 3x as well, No dice. I will look into the steam angle see what I can dig up. Share this post Link to post Share on other sites
Steak and Potatoes 13480 Posted January 19, 2015 its an issue with NAT translation on your router change one of the clients to use a different port by using -port parameter on advanced statup make sure the following is open port UDP (used for game)port+1 UDP (used for server reporting)port+3 UDP (used for VoN transmissions) i suggest using -port=25007 and then open up250072500825010 1 Share this post Link to post Share on other sites
Lady Kyrah 1109 Posted January 19, 2015 I'll just link some wisdom.https://en.wikipedia.org/wiki/Universal_Plug_and_Play#Problems_with_UPnP Share this post Link to post Share on other sites
foolee 43 Posted January 20, 2015 Nothings perfect, I still think it would be a good idea. Share this post Link to post Share on other sites
