Hexplore 0 Posted June 19, 2012 I'm not sure where to post this, but i'm having issues with trying to set up the BEC addon to the rcon client and have everything configured to the guide and properly that i can see but i launch the program and just sits on "waiting" while the server is active i have tried launched before and after server launchesAnyway anyone ran into this issue, and have any solutions Share this post Link to post Share on other sites
dayzdeadmeat 44 Posted June 19, 2012 Are BERCon and ArmA RCon insufficient? Share this post Link to post Share on other sites
Hexplore 0 Posted June 19, 2012 BEC is just an overlay over BERcon and it gives much easier administration for multiple admins etc Share this post Link to post Share on other sites
Sekra 1 Posted June 19, 2012 You should go to the bohemia forums BEC thread and ask help from the author himself if youre having problems. Share this post Link to post Share on other sites
Hexplore 0 Posted June 19, 2012 Just thought i'd ask around here because i've seen a few ppl using it in these forums Share this post Link to post Share on other sites
cm. (DayZ) 28 Posted June 19, 2012 Check your config, something is obviously wrong, most likely port or IP. Share this post Link to post Share on other sites
Hexplore 0 Posted June 19, 2012 Check your config' date=' something is obviously wrong, most likely port or IP.[/quote']good call i had it defaulted at the 127.0.0.1, but that is a loopback so it should work, but changed the ip and it worked thanks again Share this post Link to post Share on other sites
