quatermass 9 Posted January 28, 2013 (edited) Started getting serious graphic triangles plaguing my game.Since I've been placing a number of barbwire items (about 3-4) around a barn, I'm seeing a lot of grey triangles.The old flush method isn't working for more than a few seconds.Is it still bugged or is it me? A couple other players report seeing these old glitches at my barn.Seems to be only barbwire so far.Running Arma2 latest with patch 99700, dayz v1.7.4 on a Windows 7 Pro SP1 machine kept up to date with Microsoft's update.AMD graphics card with latest drivers installed a few days ago.Driver Packaging Version 9.012-121219a-151592C-ATICatalyst Version 13.1Provider Advanced Micro Devices, Inc.2D Driver Version 8.01.01.1278Direct3D Version 9.14.10.0945OpenGL Version 6.14.10.12002AMD VISION Engine Control Center Version 2012.1219.1521.27485Graphics Card Manufacturer Powered by AMDGraphics Chipset ATI Radeon HD 5500 SeriesDevice ID 68DAVendor ID 1002Subsystem ID 3080Subsystem Vendor ID 1682Graphics Bus Capability PCI ExpressMaximum Bus Setting PCI Express x16BIOS Version 012.018.000.001BIOS Part Number 113-555XZNF-10 BIOS Date 2010/02/22Memory Size 1024 MBMemory Type DDR2Core Clock in MHz 550 MHzMemory Clock in MHz 500 MHzTotal Memory Bandwidth in GByte/s 16.0 GByte/sAny help would be welcome. Edited January 28, 2013 by quatermass Share this post Link to post Share on other sites
-Se7eN- 874 Posted January 28, 2013 Some mod maps give me that too, If your drivers are up to date and your getting this on Chenarus then that is odd 1 Share this post Link to post Share on other sites
n0limit 2 Posted January 28, 2013 (edited) I'm up to date and on Chernarus and get this sometimes still.AMD 6950s in crossfire Edited January 28, 2013 by n0limit Share this post Link to post Share on other sites
AmberHelios 2071 Posted January 28, 2013 turn crossfire off Share this post Link to post Share on other sites
h3retic 224 Posted January 28, 2013 try using -winxp as a launch parameterit enables crossfire/sli Share this post Link to post Share on other sites
quatermass 9 Posted February 2, 2013 I've found that slightly adjusting the height of my ARMA2 window by as little as 4-6 pixels has reduced the amount of triangles. But still there.But others get it in full screen mode. Seems to get worse when 3 or 4 barb-wires are built close to each other.Oh hum. :) Share this post Link to post Share on other sites