pepe.lp 0 Posted August 17, 2012 Hey GuysI know this subject has been beaten to death but ive trolled through the forum and have yet to see if someone has actually come up with a solution .in the past there was an altered file or changing a value to 10000 that fixed the issue .The Shift - Flush does not work ive tried and ive triedHas anyone come up with a solution to stop this issue.......... Share this post Link to post Share on other sites
Allie (DayZ) 97 Posted August 17, 2012 it is : left "shift" plus the minus sign "-" on the number pad. Press them together and then just type "flush" without the quotes.You will not be able to see what you type !When doing the left shift and - , an invisible console opens up and you can type flush.Try it again, your screen should go black and some text apears saying it is flushing Share this post Link to post Share on other sites
Allie (DayZ) 97 Posted August 17, 2012 yesterday i had the atifacts at the army tents at berenzino, the atifacts showed and i did the flush thingy, all was fine and i was able to loot the tens without any artifacts. Share this post Link to post Share on other sites
HorribleGoat 0 Posted August 17, 2012 (edited) I have a temporal solution to offer as well if anyone reads these anymore.When I last encountered the artifacts sneaking up to Green Mountain I messed around with the graphics settings with no results until I changed both my 3d resolution and UI resolution to the same. Normally I keep the UI on higher resolution.If anyone else got this working I'd like to know! Edited August 17, 2012 by HorribleGoat Share this post Link to post Share on other sites
pepe.lp 0 Posted August 17, 2012 it is : left "shift" plus the minus sign "-" on the number pad. Press them together and then just type "flush" without the quotes.You will not be able to see what you type !When doing the left shift and - , an invisible console opens up and you can type flush.Try it again, your screen should go black and some text apears saying it is flushingYeah I tried that it doesn't work. Any other suggestions Share this post Link to post Share on other sites
falken30 1 Posted August 17, 2012 restart the game works for me 1 Share this post Link to post Share on other sites
Xucphra 453 Posted August 17, 2012 I can usually fix it by changing the 3D resolution in my graphics settings to something different, then reverting back. I've also heard changing your video memory fixes it.If all else fails, restarting the game always seems to work. Share this post Link to post Share on other sites
Rudson (DayZ) 61 Posted August 17, 2012 Changing your videomemory to "default" worked for most of my friends and myself. I never tried other stuff. And if setting to default didn´t help just set it back to "normal" and look if it is still there. Most of the times it works. Share this post Link to post Share on other sites
Xucphra 453 Posted August 17, 2012 The act of changing the setting seems to be what fixes the problem, not the actual choice of settings. Once you change something, just return to your preferred configuration. Share this post Link to post Share on other sites