Cannot start host on port 2302

[jps48 3]

I am trying to create a dedicated server and I am running into this error message when I run the .bat. I have tried disabling as well as adding excepetions to my windows firewall, and forwarding ports 2302-2308 on my router. I found a thread with the same issue but nothing mentioned in there helped fix my problem. If anyone has any suggestions id appreciate it. Thank you.

[fluks 5]

I am trying to create a dedicated server and I am running into this error message when I run the .bat. I have tried disabling as well as adding excepetions to my windows firewall, and forwarding ports 2302-2308 on my router. I found a thread with the same issue but nothing mentioned in there helped fix my problem. If anyone has any suggestions id appreciate it. Thank you.

Opening X port and then +1 and +3 , and using your internal IP in the .bat file fixed it for me.

[jps48 3]

Opening X port and then +1 and +3 , and using your internal IP in the .bat file fixed it for me.

When you say x port and +1 and +3 what exactly do you mean? If 2302 is the standard port the other ports would be 2303 and 2305? Thanks.

[fluks 5]

When you say x port and +1 and +3 what exactly do you mean? If 2302 is the standard port the other ports would be 2303 and 2305? Thanks.

Correct

[jps48 3]

Thanks for the help. Using the internal ip worked for me.

[fluks 5]

Thanks for the help. Using the internal ip worked for me.

No problem. As you can see in the other thread, I had the same problem. Couldn't figure it out for several days and it really gave me a headache.

[lundahldaniel 0]

Hey guys. Sorry for opening a pretty old thread but, I got the same problem, and none of this have worked for me. It just says "Cannot start hos on port 2302.". What should I do?

[lundahldaniel 0]

Managed to fix it by adding quotes in the .bat file :)