Excspencive pv, much lag!

[[email protected] 0]

Here is my system information

Intel core i7 2700 k

z68 gigabyte motherboard

Amd radeon 6970 i belive with 3 gigabyte

I have a 25 full hd hp 1920X1080p monitor

and have enthernet on 100 mbs But i still lag as hell and the only way for me possible playing arma 2 is to run all settings on very low/low

why does this happen i don't understand i read topics about people having bad computers but getting a 40 fps on high graphics. I get maybe 10 fps on high grpahics and this pc costs around 1800 dollars or something. I am going mad!

[FatBoy (DayZ) 8]

Is your FOV turned all the way up? Set it to half or even lower.

Is your Vsync on? Turn it off.

[[email protected] 0]

EVERYTHING IS low or off

and i play with very low grpahic terrain and everything its the only way i wont make it lag i cant just turn shit to high on graphcis and turn of vsync and fov it still lags

[[email protected] 0]

I dont know if its the problem but does it mater if you have a cable between the motherboard and the monitor and not the grapchic card?

[FatBoy (DayZ) 8]

I dont know if its the problem but does it mater if you have a cable between the motherboard and the monitor and not the grapchic card?

Why dont you connect your monitor to your graphics card?

[[email protected] 0]

ANd one more thing My pc grachis card should be able to run on highest grpahics just without vsyc fov and all that stuff? Like is my graphic card up to date?

[nik21 287]

I dont know if its the problem but does it mater if you have a cable between the motherboard and the monitor and not the grapchic card?

Then your actual video card is inactive/ disabled and you're using the onboard chip.

[[email protected] 0]

The only way for me to get 60 fps is to play at low/ most of the times very low and when i play on high everything (not vsync fov and that shit) i get 29 fps maybe even sometimes if im lucky near 30)

[[email protected] 0]

Then your actual video card is inactive/ disabled and you're using the onboard chip.

So thats my only problem? or so you say if i use a cable between the motherboard and the monitor the grphic card is basicly inactive? And the problem is when i use a hdmi cable (because my graphic card for some reason dosent have dvi only a black input i dont know about) i dont get any graphic on my screen it wont detect any signals so it dosent mater i CANT! use my grpahic card! it just wont give any signal. WHy?!?!

[MarksmanKing 17]

You haven't been listening to these people, you need to connect your monitor to your graphics card, because right now it's using an onboard chip which is most likely crap

EDIT: Didn't see your last post.

Make sure all your drivers are up-to-date.

Edited December 4, 2012 by MarksmanKing

[[email protected] 0]

Why dont you connect your monitor to your graphics card?

Because i dont get shitty signal or shit on my screen when i connect to the graphic card! dont know why any tips?

[[email protected] 0]

You haven't been listening to these people, you need to connect your monitor to your graphics card, because right now it's using an onboard chip which is most likely crap

EDIT: Didn't see your last post.

Make sure all your drivers are up-to-date.

i know but it wont get any shitty signal shit dont know why!