mrcyberdude

FIX for Battleye all versions - Kicked client not responding - SOLVED. By changing the router settings.... YES inside the router settings. Encapsulation - LLC or VC MUX Change the encapsulation from VC MUX to LCC This has solved weeks of not being able to connect to all servers with battleye for more than 30 seconds. Can a mod Please make a STICKY post of this. MrCyberdude

Wrong, I always run PPoA and after changing to LLC Battleye started working as soon as I rebooted the modem.

I'm on iinet and I am currently using their iiNet branded BoBLite and the setting menu is located as below, After logging into your modem settings page. Normally this is one of the following depending on brand of modem. http://192.168.1.1 or http://192.168.1.254 or http://192.168.1.100 or http://10.1.1.1 or http://10.0.0.1 or http://10.0.0.2 If you cannot get in then try this link http://portforward.c...routerindex.htm for more info on you brand of modem. 5. Advanced Settings 5. Internet setup & ADSL standard Wan Configuration number --- Ethernet or VPI/VCI --- Encapsulation --- Protocol in use one -------------------------------- 8/35 ----------------------- LLC ---------------- PPPoA Then I click on the one which takes me to the modem menu where you enter your ISP user name and password. WAN configuration number 1 7. Encapsulation - LLC or VC MUX Pick LLC and then make sure you save the settings and after then reboot the modem. MrCyberdude

For help with your individual modem try http://portforward.com/ to at least get into the settings. It took me weeks to get this working and I installed Arma2 and 3 different mods about 9 times so I have done enough for now.

Try this. http://dayzmod.com/f...ponding-solved/