Still... cannot see my server listed in the community tab

[DrZeddy 9]

Hiya all,

I think I must also be very stupid or its something beyond my control.

I now have the server running and I can see it in the LAN tab on DayZ SA - but I cannot see it in the community tab.

I have tried setting the fire wall  settings as others have posted on here.

but it didn't work.

 

I have pasted the code in my start.bat file and the code in my serverdz.cfg file and the beserver_x64.cfg is empty.

I don't know how to find the ip address of the server...

I think I need it to configure BE

 

I have DayZ Server Files running on my secondary PC

And I wondered if using two pc's from the same hub is affecting it?

I have everything at home or a normal home connection not a business connection or public./static ip either.

Finally

Quote

steamQueryPort = 2305;

when I have the line above in my serverdz.cfg file - then I cannot see the server listed in the LAN or the community tabs

when I DONT have the line above in my serverdz.cfg file - then I can only see the server listed in the LAN tab

 

 

Please can someone help?

 

Thanks

 

Jaan

 

 

Rem START.BAT
Rem =========

@echo off
cls
echo.
set watch=DayZ Server
title %watch% Watchdog
cd "C:\DayZServer1"
:watchdog
echo (%time%) %watch% started.
start "DayZ Server" /wait "DayZServer_x64.exe" -config=serverDZ.cfg -port=2302 -profiles=C:\DayZServer1\playerlogs -dologs -adminlog -netlog -freezecheck -noFilePatching -BEpath=C:\DayZServer1\Battleye
echo (%time%) %watch% closed or crashed, restarting.
goto watchdog

 

 

// SERVERDZ.CFG FILE
// ==================

// Server name - max 64 chars
hostname = "Jaan Doh - DayZ SA Vanilla";

// Password for connection to the server
password = "";

// Password to become server admin  
passwordAdmin = "";



// Maximum amount of players
maxPlayers = 30;



// Verifies .pbos against .bisign files. (use only 2)
verifySignatures = 2;

// Server will allow connection only to clients with same exe revision as server when active (value 0-1)
forceSameBuild = 1;



// Enable/disable voice over network (value 0-1)
disableVoN = 0;

// Voice over network codec quality (values 0-30)
vonCodecQuality = 7;



//turn on/off 3rd person view for players on the particular server instance (value 0-1)
disable3rdPerson = 0;

//turn on/off cross-hair on the particular server instance (value 0-1)
disableCrosshair = 0;



// Server Start Time
// Initial ingame time of server. "SystemTime" means local time of machine. Another possibility is to set the time to some value in "YYYY/MM/DD/HH/MM" format, f.e. "2015/4/8/17/23".
serverTime = "2018/11/20/06/00";

// Accelerated Time (value 0-24)
// This is a time multiplier for in-game time. In this case time would move 24 times faster than normal, an entire day would pass in one hour.
serverTimeAcceleration = 4;

// Persistent Time (value 0-1)
// Actual server time is saved to storage, so when active, next server start will use saved time value.
serverTimePersistent = 0;



// Communication protocol used with game server (use only number 1) 
guaranteedUpdates = 1;



// Number of players concurrently processed during login process. Should prevent massive performance drop during connection when a lot of people are connecting in the same time.   
loginQueueConcurrentPlayers = 5;

// Maximum number of players that can wait in login queue
loginQueueMaxPlayers = 30;


// DayZ server instance id to identify number of instances per box and their storage folders with persistence files
instanceId = 1;

// how many persistence history files should been kept by instance, number is looped over during save
lootHistory = 1;

// Disable houses/doors persistence (value true/false), usable in case of problems with persistence
storeHouseStateDisabled = false;

// Checks if persistence files are corrupted and replaces corrupted ones with empty ones (value 0-1)
storageAutoFix = 1;



// Sets the respawn delay (in seconds) before the player is able to get a new character on the server, when the previous one is dead
respawnTime = 20;



// Message of the day displayed in the in-game chat
motd[] = {"Thank You for gamingon our server","Visit our website www.jd-uk-dsf-gaming.co.uk","Private RP servers coming soon"};

// Time interval (in seconds) between each message
motdInterval = 900;
 
// Max ping value until server kick the user (value in milliseconds)
maxPing= 250;               
 
// Format for timestamps in the .rpt file (value Full/Short)
timeStampFormat = "Short";

// Logs the count of currently connected players (value in seconds), needs to have the -dologs launch parameter active
logPlayers = 900;

// Saves the server console log to a file in the folder with the other server logs
logFile = "server_console.log";

//shows info about the character using a debug window in a corner of the screen (value 0-1)
enableDebugMonitor = 0;

// Logs the average server FPS (value in seconds), needs to have -dologs launch parameter active
logAverageFps = 0;

// Logs the server memory usage (value in seconds), needs to have the -dologs launch parameter active
logMemory = 0;
// defines Steam query port, should fix the issue with server not being visible in client server browser
// steamQueryPort = 2305;




class Missions
{
    class DayZ
    {
        template="dayzOffline.chernarusplus";        //used mission
	//first part is mission name, second part is used map
    };
};

 

[lbmaster 21]

You need to open port 27016 in your Firewall AND your Router. The reason why you can not see the server in the community tab is, because the router blocks the connection to your server.

LBmaster

[DrZeddy 9]

Hi I think I have setup up the router and windows firewall and would have posted screen grabs but I cannot upload photos.

I looked for help or a guide on how to upload photos but I think I can only put links to photos already online?

In the router I opened ports 2302-2306, 27016 both UDP and TCP

In the firewall I added incoming rules for the same ports (2302-2306, 27012-27018) both TCP and UDP

I'm at a loss and cannot figure it out.

I read somewhere another member wrote... "If you can see it in DayZSpy then your on"

I cannot see my server listed in DayZSpy

 

Its driving me nuts lol

 

[XxFri3ndlyxX 19]

You  will not see your own server listed in the community tab as its connected on the same router/network. The only way to see it is that if you use a vpn then it will show to you. So use the lan tab to connect and other user outside of your network will use the one in community tab.

[XxFri3ndlyxX 19]

1 hour ago, DrZeddy said:

Hi I think I have setup up the router and windows firewall and would have posted screen grabs but I cannot upload photos.

I looked for help or a guide on how to upload photos but I think I can only put links to photos already online?

In the router I opened ports 2302-2306, 27016 both UDP and TCP

In the firewall I added incoming rules for the same ports (2302-2306, 27012-27018) both TCP and UDP

I'm at a loss and cannot figure it out.

I read somewhere another member wrote... "If you can see it in DayZSpy then your on"

I cannot see my server listed in DayZSpy

 

Its driving me nuts lol

 

If you cant see your server in dayzspy then you did something wrong either in windows firewall or whatever firewall you use or in the router. I suggest trying to dmz the computer that the server is hosted then run the server. Wait a minute or two then check dayzspy. If the server is listed then you know you missconfigured ports on the router. If it does not show then you missconfigured on the windows firewall. When your done, don't forget to disable dmz as your computer is exposed.

Edited November 22, 2018 by XxFri3ndlyxX

[DrZeddy 9]

I will try the DMOZ route first as that seems the easier way to find out.

Thank You I will report back in a short while.

 

 

Jaan

[GaryWalnuts 1680]

1 hour ago, DrZeddy said:

I looked for help or a guide on how to upload photos but I think I can only put links to photos already online?

imgur has always worked well with these forums

go to imgur.com then click on new post, drag your pic into the box and it'll upload.  right-click on the image and open in a new tab. 

the url in the address bar will be the link you use here on the forums (click Insert other media then Insert image from url )

[DrZeddy 9]

Okay I can see the server in the DayzSpy now...

It is showing up without a country (country unknown) 

I am in UK so I don't know why that happened or even how to put it right.

 

So that would mean (going by your comments above) that I have done something wrong in my router...

The router I use is a Plusnet Hub One

[https://www.plus.net/help/broadband/router-user-guides/]

 

I normally get a good speed out of it.

Should I try to add the ports again? after deleting all game entries from it?
I didn't really have any other game settings in there and Steam just worked out of the box without changing the Hub settings...

The instructions seem to be straight forward for adding a port,

but how it affects the network I dont know...

Maybe its going to the wrong device (phones/laptops/pc)

 

 

[XxFri3ndlyxX 19]

19 minutes ago, DrZeddy said:

Okay I can see the server in the DayzSpy now...

It is showing up without a country (country unknown) 

I am in UK so I don't know why that happened or even how to put it right.

 

So that would mean (going by your comments above) that I have done something wrong in my router...

The router I use is a Plusnet Hub One

[https://www.plus.net/help/broadband/router-user-guides/]

 

I normally get a good speed out of it.

Should I try to add the ports again? after deleting all game entries from it?
I didn't really have any other game settings in there and Steam just worked out of the box without changing the Hub settings...

The instructions seem to be straight forward for adding a port,

but how it affects the network I dont know...

Maybe its going to the wrong device (phones/laptops/pc)

 

 

Is your server ip static?  If it aint and you dont know how to do it you could download a simple program like port forward network utility or simply doing it in your router. This assure that the port are always going to the server computer.

Then once your server has a static ip then you do the port.

Edited November 22, 2018 by XxFri3ndlyxX

[DrZeddy 9]

Thank You Gary,

 

I managed to upload the pics of the settings:

inbound firewall

 

outbound firewall

 

The old server  (JD UK Noobs...) 

Thats how I had it before the .063 beta update came out

And since then I moved the server of this pc onto the old 8350 box

 

[DrZeddy 9]

Hiya XxFri3ndlyxX,

No I do not have a static ip,

I'm running the server in my home on my home broadband.

I had a look at the utility you mentioned and I cannot afford it having shelled out on an SSD and 16GB Ram for the server

So i tried to add the ports to my router.

I started by adding Steam Games to list of permitted apps

 

Then I added DayZ server to the list as using the steam games (previous step) as a base for the ports (see below)

 

And finally I added the dayz server ports to that bit above

 

The server is running (no errors)

Although I think it is not active on dayzspy 

it shows as last seen 1hour ago (when I tried the DMOZ) 

I feel closer but i still dont know whats going on

Edited November 22, 2018 by DrZeddy

[XxFri3ndlyxX 19]

@DrZeddy The program can be downloaded as a trial. The static ip is free within the trial. 

This is how i do in my router.

 

The only reason all my port are one by one is because this bell router is bulshit at port forwarding when doing 2302-2306. It wouldn't properly forward it so i had to add them one by one.

 

Edited November 22, 2018 by XxFri3ndlyxX

[DrZeddy 9]

Thank You 

 

Okay So put them in separately...

I will split the ports listing up into single ports and try again.

 

[XxFri3ndlyxX 19]

1 minute ago, DrZeddy said:

Thank You 

 

Okay So put them in separately...

I will split the ports listing up into single ports and try again.

 

The only reason all my port are one by one is because this bell router is bulshit at port forwarding when doing 2302-2306. It wouldn't properly forward it so i had to add them one by one.

[XxFri3ndlyxX 19]

So did you get it working?

Edited November 22, 2018 by XxFri3ndlyxX

[DrZeddy 9]

I have put the ports in separately like your photo with the exception of your port 8766

I did not add that one and instead of that one i have port 27016 there instead

I can play the game on the lan but not see it in dayzspy or the dayz server browser

 

Edited November 22, 2018 by DrZeddy

[XxFri3ndlyxX 19]

Look top left of screenshot. It displays port needed to be open. Make sure all of these are open. By that i mean when you start your server. Check what port are displayed and forward them so they are open.

Edited November 22, 2018 by XxFri3ndlyxX

[DrZeddy 9]

Hiya Xx-Friendly-xX, 

Wow, I ever saw that before, you do mean in the line that says... 

"22:29:14 SUCCESS : SteamGameServer_Init(0, 8766, 2302, 2306, 3, 0.63, 149464)"

 

So those are the ports... And I just have to check in my instance at home. I'm at work now but I will check it when I get home. I had turned the server off last night since I couldn't see it in DayzSpy. 

Thank you too for your effort and time. 

 

Jaan 

[XxFri3ndlyxX 19]

13 minutes ago, DrZeddy said:

Hiya Xx-Friendly-xX, 

Wow, I ever saw that before, you do mean in the line that says... 

"22:29:14 SUCCESS : SteamGameServer_Init(0, 8766, 2302, 2306, 3, 0.63, 149464)"

 

So those are the ports... And I just have to check in my instance at home. I'm at work now but I will check it when I get home. I had turned the server off last night since I couldn't see it in DayzSpy. 

Thank you too for your effort and time. 

 

Jaan 

Yeah Let met know how it goes.

[DrZeddy 9]

Well hello again,

I added the 8677 port to my firewall and router so it can pass through .

But now (since the last update?) I get an error

Cant find UADropItem...

So having read another one of the newer threads where another member mentioned unpacking  SCRIPT FILE (pbo) and uncomment some code,

I will try that lol

and then retry running the server again.

 

 

 

[barci335 1]

21 minutes ago, DrZeddy said:

Well hello again,

I added the 8677 port to my firewall and router so it can pass through .

But now (since the last update?) I get an error

Cant find UADropItem...

So having read another one of the newer threads where another member mentioned unpacking  SCRIPT FILE (pbo) and uncomment some code,

I will try that lol

and then retry running the server again.

 

 

 

Dont. just go to your Documents Folder / Dayz and delete all .xml files. start server and you are good to go. :)

Edited November 22, 2018 by barci335

[DrZeddy 9]

Thank you :)

That got my server going again.

Now i have the same error on my other pc

So I will delete the xml files of there too (in my documents\dayz folder) and reboot the pc

 

[barci335 1]

11 minutes ago, DrZeddy said:

Thank you :)

That got my server going again.

Now i have the same error on my other pc

So I will delete the xml files of there too (in my documents\dayz folder) and reboot the pc

 

no problem. ;)

[DrZeddy 9]

Well I still don't see my server in DayZSpy 

Router firewall

 

Windows Firewall

 

Hahaha I have to laugh because I must be an idiot lol

Well its still not working - By that I mean that I cannot see my server listed in DayZ Spy 

Its called JD - DayZ SA Vanilla

[barci335 1]

4 minutes ago, DrZeddy said:

Well I still don't see my server in DayZSpy 

Router firewall

 

Windows Firewall

 

Hahaha I have to laugh because I must be an idiot lol

Well its still not working - By that I mean that I cannot see my server listed in DayZ Spy 

Its called JD - DayZ SA Vanilla

change in your server config:

// steamQueryPort = 2305; to 

steamQueryPort = 2305;